SilverStone SG05 Specifikace

SUGO SERIESSG05

Install your graphics card or expansion card.Установите графическую карту или карту расширения.Installieren Sie Ihre Grafik- oder andere Expansionskar

After all cables and wirings are connected, reinstall the top cover and secure it.Подключите все необходимые провода и кабели, после чего поставьте на

Installation complete. Установка завершена.Die Installation ist vollständig.Installation terminée.Instalación completa.㉘㾌ᴴ 㝸⨀╌㛼㏩⏼␘. Installazione comp

Press the area as shown to release the clips, then remove the front panel.Нажмите на указанные зажимы и снимите переднюю панель.Drücken Sie auf die St

Remove the 4 screws holding the fan, and remove the fan from the interior of the chassis. Then reinstall the chassis by following the previous steps i

1Product OverviewMaterialModelMax. DC Output 300WLoad RangeMotherboardDrive BayCooling SystemMax.(Amps)Peak (Amps)Min.(Amps)Range (%)Ripple(mVp-p) Com

23.25 Bay3.5” HDD3.5” HDD TRAYFILTER BKTSLIM OPTICAL DRIVE TRAYSLIM OPTICAL DRIVE (SOLD SEPARATELY) PSU OPTIONALTOP COVEREXPANSION SLOTx 2MOTHERBOARD

Remove the screws holding the hard drive bracket with a screw driver as shown, then remove the cage outward from the chassis.С помощью отвертки открут

Press the area as shown to release the clips, then remove the front panel.Remove the screws holding the optical drive bracket with a screw driver as s

Remove the tab of optical drive bay with a screw driver.С помощью отвертки уберите накладку отсека для оптического привода.Entfernen Sie Klappe des op

Install your motherboard into the chassis as shown and secure with included screws.Установите материнскую плату в корпус и закрепите ее прилагаемыми ш

Install your 2.5” hard drive onto the optical drive bracket as shown and secure with included screws. (the maximum thickness of 2.5” hard drive is 15m

Install your 3.5” hard drive onto the bracket as shown and secure with screws, then reinstall the bracket into the chassis and secure with screws.Уста